The only folding RV bumper mount cargo carriers that we have are all steel, not aluminum. We do have these available in a few different sizes, which I have listed below.
- 24x40 etrailer Cargo Carrier for RV Bumper # e99050
- 24x60 etrailer Cargo Carrier for RV Bumper # e99049
- 24x64 etrailer Cargo Carrier for RV Bumper # e83YR
- 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR view full answer...
It looks like you were looking at the bumper mount cargo carrier options for your RV. The 24"x84" etrailer Cargo Carrier for RV Bumper # e96ZR is the closest option to the 56" x 90" that you are wanting.
You are not going to find a cargo carrier that extends out from your bumper 56". This is because it would extend too far out and cause extra stress, because the further the weight is extended the more stress it puts on the bumper.
Technically you could get multiple of the Mount-n-Lock... view full answer...
Yes, you can absolutely get the support brackets from the etrailer cargo carriers for RV Bumpers # e99049 separately. The correct part number for those support brackets are the following:
- Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets # MO34VR view full answer...
There are cargo carriers that can be fitted with add-on bike carrier accessories. Good for you for trying to plan ahead!
However any item, such as a bike rack or cargo carrier, that will be installed in a hitch that is on the rear of a trailer or motorhome must be specifically rated for that RV application. Regular bike and cargo carriers made for cars cannot be used on RVs. They are not strong enough.
The reason is that the typically longer distance between the rear axle of an RV and... view full answer...
I was able to verify with Horizon Global that the Rola Swinging Enclosed Cargo Carrier for 2" Trailer Hitch # 59109 is safe to use with your 2022 Tiffin Open Road Allegro.
The Yakima BackSwing Swing Away Hitch Extender # Y02483 cannot be used on your RV per Yakima.
Since the Rola cargo carrier integrates tail lights you will need a Pollak 7 Pole to 4 Way Connector Adapter # PK12716 unless you already have a 4-way on your Allegro. view full answer...
The 24x84 etrailer Cargo Carrier for RV Bumper, # e96ZR is sold as an assembly. We do not have an option for what you are looking for. view full answer...
We have a bumper mounted hitch with a 500 lb capacity. Check out the Curt Bumper Hitch part # E-3S. You should confirm that the bumper on your RV has the same 500 lb tongue weight capacity if you plan on using your cargo carrier to it's capacity.
You should note that the weight of the cargo carrier needs to be taken into account as tongue weight. view full answer...
For the Lippert Components flip down version of added storage the # LC243621 is the only option currently available from our supplier. However, we do have other options of RV bumper bike rack/storage available, such as the # S80605 & the # S80600. These are each built for 4" to 4-1/2" continuous welded steel square bumpers. They are not a fold-up version but work well if you are looking for a bike rack that can also be used to strap extra cargo to.
If however you are more interested... view full answer...
There is not an option to get only the cargo carrier without the brackets for the 24x40 etrailer Cargo Carrier for RV Bumper # e99050.
I have added a link below to a video review for you to check out as well. view full answer...
There is not a difference between the 2009 to 2013 Honda Fit as far as the size of hitch that will fit and the maximum amount of weight it can carry. The Honda Fit will use a Class I, 1-1/4 inch hitch with a tongue weight capacity of 200 lbs.
For a hitch that fits a 2009 to 2013 Honda Fit I would recommend the Curt Class I 1-1/4 Inch Hitch, part # C11064. I am including a link to the installation instructions and a link to a video of the hitch being installed on a 2012 Honda Fit.
I have... view full answer...
If you're wanting to cover the contents of your 24x64 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs # e83YR during travel then I recommend using the etrailer Cargo Bag w/ Mounting Straps - Water Resistant - 20 cu ft - 59" x 24" x 24" # 988501. This is a water resistant bag that will fit in the tray of the etrailer Cargo Carrier # e83YR and protect the contents from the elements during travel.
If you have specific items like a generator that you'll be carrying, there... view full answer...
I have a solution for you, but there is not a cargo carrier available with a 2-1/2" shank. Instead you can use a hitch reducer like the Blue Ox Hitch Reducer Sleeve - 2-1/2" to 2" Trailer Hitch # BX88187, which will turn your 2-1/2" receiver into a 2" receiver and allow you to use the Gear Deck # H00604 you were looking at, or any other hitch mounted cargo carrier.
This is a common and easy solution for adapting your 2-1/2" receiver, and is the best solution. view full answer...
Yes, you can add fat tire adapters to the Hollywood Racks Sport Rider SE2 Platform Bike Rack w/ Cargo Carrier # HR1450Z-85 that you referenced with the part # HRSPRWH-F-HD and you can use this rack at the rear of a motorhome as well! view full answer...
As you have already noted, there is no one hitch-mounted carrier that can handle the weight of a dirt bike and 5 bicycles. Most 2-inch hitches that are on the back of an RV will typically have a maximum tongue weight (TW) or downward force capacity that tops out at 350- to 500-lbs. This means that the combination of the carrier and what is on it cannot exceed that hitch capacity. This TW capacity is usually noted on a sticker on the hitch itself. Be sure to confirm what that hitch can handle... view full answer...
Any type of carrier that will be used on the back of an RV or trailer - such as a bike, cargo or motorcycle carrier - must be rated specifically for use on such vehicles. This restriction has more to do with distance and leverage than just sheer weight.
On an RV or trailer, the rear axle will be much further forward of the hitch than with a typical passenger car. This distance translates into more leverage on the hitch and carrier, much in the same way that using a pipe on the end of... view full answer...
We offer the 2-inch Ultra-Fab hitch # UF35-946403 that fits trailer frames from 47-1/8-inches wide to 77-inches wide, measured at the frame's outside edges. This hitch welds on to either I-beam, C-channel or rectangular 5th-wheel trailer frames.
This hitch is not rated for towing, but for use with accessory items like an RV-rated bike carrier, such as the Swagman XC # S64650. The hitch has a 350-lb tongue weight capacity and its installation instructions are linked for you.
Please keep... view full answer...
Yes, the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide, # 13703 is for bike racks, cargo carriers, etc. and can be bolted to the vehicle frame or welded on for a no-drill application. view full answer...
We do offer universal-fit hitches for RVs that you can see on the linked page. These include both frame-mount and bumper-mount types. For a front installation chances are that you will need to use a frame-mounted hitch like # C13702 on your 2003 Itasca Horizon Class A motorhome. But since equipment can vary from one MH to another you'll want to contact Itasca with your RV's VIN to find out what they say about hitch installation on your specific RV.
If they give you the all-clear to install... view full answer...
We do offer a front-mount hitch receiver for the 2013 Ford E-450 RV Cutaway Chassis that is the foundation for your Forest River Class C motor home.
Draw-Tite offers their hitch # 65053 which has a 2-inch receiver opening, 500-lb vertical load rating and which comes complete with all required installation hardware. The written installation instructions are linked for you at right along with two helpful articles concerning hitch installation tips.
If you intend to use a snow plow on the... view full answer...
We do not have a tail light kit specifically for the Curt hitch mounted Cargo Carrier, item # C18100.
A better solution may be the Pro Series 24x60 Railed Cargo Carrier for 2 inch Trailer Hitches, item # 63153 , along with the Light Kit for Rola Railed Cargo Carriers, item # 20174 or the LED version, part # 98174LED. The lights recess into this carrier and are well protected by the carriers railing. view full answer...
Go To Results